Invited Lectures/Papers Presented

1

R. G. Reddy and G. W. Healy: "Distribution of Cobalt between Liquid Copper and Copper Silicates," 109th AIME Annual Meeting, Las Vegas, February 26-29, 1980.

2

R. G. Reddy and G. W. Healy: "Solubility of Cobalt between Liquid Copper and Cu20-Si02 Slags," 19th Annual Conference of Metallurgists of CIM, International Symposium of Metallurgical Slags, Halifax, August 19-23, 1980.

3

R. G. Reddy, G. P. Singh, J. B. See, and L. L. Oden: "Concentration of Impurities in the Matte Phase from Reverberatory Discard Slags," presented at the 20th Annual Canadian Institute of Mining and Metallurgy Conference of Metallurgists, Hamilton, Canada, August 23-27, 1981.

4

R. G. Reddy: "The Recovery of Nonferrous Metals from Primary Copper Smelter Discard Slags," Symposium on Resource Recovery and Environmental Issues of Industrial Waste, Gatlinberg, Tennessee, October 28-30, 1981.

5

R. G. Reddy: "Recovery of Cu, Bi, As, and Sb from discard Copper Smelting Slags," 111th Annual AIME Meeting, Copper, Nickel, Cobalt and Precious Meals Session, Dallas, February 14-19, 1982.

6

R. G. Reddy and C. C. Acholonu: "Activity Coefficient of Copper Oxide (CuO0.5) in Silica Unsaturated Iron Slags," 112th Annual AIME Meeting, Atlanta, March 6-10, 1983.

7

R. G. Reddy and C. C. Acholonu: "Solubility of Cobalt in Silica-Unsaturated Iron Slags," 112th Annual AIME Meeting, Physical Chemistry and Process Technology Session, Atlanta, March 6-10, 1983.

8

R. G. Reddy and C. C. Acholonu: "Distribution of Nickel Between Copper-Nickel and Silica-Unsaturated Iron Slags," AICHE Summer Meeting, Denver, Aug. 28-31, 1983.

9

R. G. Reddy and L. L. Oden: "Recovery of Copper from Industrial Copper Reverberatory slags," International Sulfide Smelting Symposium, AIME, Extractive and Process Metallurgy Fall Meeting, San Francisco, November 6-9, 1983.

10

R. G. Reddy: "Research (High Temperature Reactions) at the Department of Chemical and Metallurgical Engineering," Invited Speaker, Conference on High Temperature Science and Technology, Sandia National Laboratories, Livermore, CA, November 10, 1983.

11

P. Sahoo and RG. Reddy: "Activity of Nickel Oxide in Fe0-Fe01.5-Si02 Slags," 113th TMS-AIME Annual Meeting, Los Angeles, CA, February 26 - March 1, 1984.

12

R. G. Reddy and C. C. Acholonu: "Activity Coefficient of Cobalt Oxide in Alumina Saturated Iron silicate Slags," 113th TMS-AIME Annual Meeting, Los Angeles, CA, February 26, March 1, 1984.

13

R. G. Reddy: "Interpretation of Thermodynamic Data from Structural Analysis," Guest Speaker, The Sierra Nevada Chapter of SAMPE meeting, Reno, May 24, 1984.

14

R. G. Reddy: "Effect of slag Composition on the Activity of Coefficient of Copper Oxide in Slags," Bay Area High Temperature Science and Technology Symposium, Lawrence Berkeley Laboratory, Berkeley, CA, November 8, 1984.

15

V.L. Prabhu and R.G. Reddy: "Recovery of Copper from B. F. Slags," 114th Annual Meeting, The Metallurgical Society of TME-AIME, New York, February 24-28, 1985.

16

V. L. Prabhu and R. G. Reddy: "Kinetics of CuO0.5 Reduction from Liquid Slags," 114th Annual Meeting, The Metallurgical Society of TMS-AIME, New York, February 24-28, 1985.

17

R. G. Reddy: "Recovery of Metals for Slags," Invited Lecture, Department of Metallurgy and Materials Science, University of Cambridge, England, October 27, 1985.

18

R. G. Reddy: "Kinetic Studies on Reduction of Nonferrous Metal Oxides with Carbon," Invited Lecture, Institute fur Allgeneine Metallurgie, Technische Universitat Clausthal, Germany, October 3, 1985.

19

P. Sahoo and R. G. Reddy: "Cobalt Oxide Activity in Iron-Silicate Slag," 115th Annual Meeting, The Metallurgical Society of TMS-AIME, New Orleans, March 2-6, 1986.

20

R. G. Reddy: Invited Lecture, "Waste Disposal Methods for Precious Metals," 10th International Precious Metals Conference and Exhibition, IPMI, June 8-12, 1986.

21

E. P. McCarroll, T. P. Pickle and R. G. Reddy: "Thermodynamic Activity of Hydrogen Fluoride in Aqueous HF-H2O Solutions," Presented at the 1986 Annual AIChE Meeting, Florida, November 2-7, 1986.

22

R. G. Reddy and M. Blander: "Modeling of Sulfide Capacities of Silicate Melts," 115th Annual Meeting, The Metallurgical Society of TMS-AIME, New Orleans, March 2-6, 1986.

23

R. G. Reddy, B. Chen, and M. Blander: "Thermodynamic Modeling of Sulfide Capacities of Na2O-SiO2 Melts," International Symposium on Molten Salts, Hawaii, October 18, 23, 1987.

24

R. G. Reddy and R. K. Mishra: "Recovery of Precious Metals by Pyrometallurgical processing of Electronic Scrap," International Precious Metals Institute, Brussels, Belgium, June 14-18, 1987.

25

R. G. Reddy, B. Chen and M. Blander: "Modeling of Sulfide Capacities," 3rd International Conference on Molten Slags and Fluxes," University of Strathclyde, Scotland, June 27-29, 1988.

26

V.L. Prabhu and R. G. Reddy: "Reduction of Metal Oxides from Liquid Slags," 3rd International Conference on Molten Slags and Fluxes," University of Strathclyde, Scotland, June 27-29, 1988.

27

P. Fisher, R. K. Mishra, and R. G. Reddy: "Characterization of Gold Polishing Powders," 12th IPMI Conference and Exhibition, Boston, June 5-9, 1988.

28

H. Hu and R. G. Reddy: "Viscosities of Binary Silicate Melts," International Symposium on Casting of Near Net Shape Products, TMS-AIME, Honolulu, Hawaii, November 13-17, 1988.

29

E. Maurice, Jr. and R. G. Reddy: "Yttrium Oxide Activity in Fluoride Melts," Rare Earths Symposium, TMS-AIME, Las Vegas, Nevada, March 1, 1989.

30

H. Hu and R. G. Reddy: "Viscosity of Molten SPL Flux," Cast Shop Technology - II, TMS-AIME, Las Vegas, NV, February 28, 1989.

31

X. Li and R. G. Reddy: "Thermodynamic Studies on Spent Pickling Solutions," Metallurgical Process Fundamentals, SME-AIME, Las Vegas, Nevada, March 1, 1989.

32

H. Hu and R. G. Reddy: "Modeling of Viscosities of Binary Alkaline-Earth Metal Oxide and Silica Melts", High Temperature Materials Chemistry 89, National Institute of Standards and Technology (NIST), Gaitheesburg, MD, April 4, 1989.

33

R. G. Reddy: "Sulfide Capacities of Iron and Steel Making Slags," Invited Lecture, Mukund Iron and Steel Company, and Indian Institute of Metals, Bombay, August 9, 1989.

34

R. G. Reddy: "Effects and Control of Inclusions in Steel," Invited Lecture, Defense Metallurgical Research Laboratory (DMRL), Hyderabad, India, August 11, 1989.

35

B. Chen, R. G. Reddy and M. Blander: "Modeling of Sulfide Capacities in Ternary Slags," TMS-AIME, Anaheim, CA, February 21, 1990.

36

B. Chen and R.G. Reddy: "Thermodynamic Studies on HF-HNO3-H2O Solutions," TMS AIME, Anaheim, CA, February 20, 1990.

37

B. Chen, R. G. Reddy, G.L. Horter, and J. B. Stephenson: "Solubilities of Stainless Steels in HF-HNO3-H20 Solutions," SME-AIME, Salt Lake City, UT, February 27, 1990.

38

R. G. Reddy and L. Brewer: "Thermodynamic Properties of Titanium-Aluminum alloys," The Gordon Research Conference on Reactions at the Interface, Meridian, NH, July 23-27, 1990.

39

R. G. Reddy, H. Hu, and M. Blander: "Modeling of sulfide capacities in binary slags," TMS, New Orleans, LA, February 20, 1991.

40

R. G. Reddy and N. H. Mohd-Noor: "Non-stoichiometry of tungsten dioxide," TMS, New Orleans, LA, February 21, 1991.

41

M. V. Klein and R. G. Reddy: "Kinetics of Reduction of Chromite with Carbon," TMS New Orleans, LA, February 18, 1991.

42

R. G. Reddy: "Structure and Properties of Lead B.F. Slags," Invited Lecture, Metallurgie Hoboken-Overpelt (MHO), Hoboken, Belgium, July 11-12, 1991.

43

R. G. Reddy and A. Narayan: "Electrochemical Studies and Anode Reaction Mechanisms of Al-Li alloys and L2O-LiF-CaF2 Melts," Third international Symposium on Molten Salt Chemistry and Technology, Paris, France, July 15-19, 1991.

44

R. G. Reddy: "Metals Recovery Processes and Technologies," Invited Lecture, US-EPA and ICF Inc., Washington, D.C., December 5, 1991.

45

R. G. Reddy and J. Y. Yen: "Thermodynamics of Mineral Bacterium Reactions", TMS, San Diego, CA, March 2, 1992.

46

R. G. Reddy, H.Hu and M. Blander: "Modeling of Sulfide Capacities in Silicate Slags," TMS, San Diego, CA, March 3, 1992.

47

R. G. Reddy: "Viscosity of Lead B. F. Slags," Invited Lecture, MHO, Hoboken, Belgium, February 6, 1992.

48

R. G. Reddy: "Phase Stability in Structural Intermetallic Composites," Invited Lecture, DMRL, Hyderabad, India, August 6, 1992.

49

R. G. Reddy: "Metal Recovery Processes and Technologies," Invited Lecture, IIT, Bombay, India, August 11, 1992.

50

P. R. Taylor and R. G. Reddy: "Plasma Processing of Materials," International Conference on Advanced Synthesis of Engineered Structural Materials, ASM, San Francisco, September 2, 1992.

51

R. G. Reddy: "Sulfide Capacities of Ordered Liquid Melts," Invited Lecture, Billiton Research, The Netherlands, December 15, 1992.

52

R. G. Reddy and K. N. Hebbar: "Interfacial Reactions in Cu-Al Intermetallics/Al2O3 Composites," TMS, Denver, 1993.

53

S. Chetty, A.P. Lingras and R.G. Reddy: "Analysis of Energy Consumption in Non-Ferrous Metals," Paul E. Queneau International Symposium, Denver, 1993.

54

E. Torma, R. G. Reddy, and J. E. Wey: "A Preliminary Investigation of Uranium Extraction from Contaminated Soils by Bioprocessing," Soil DECON '93, Gatlinburg, USA, 1993.

55

R. G. Reddy: Invited Lecture, "Solubility of Cations in Pickling Solutions," International Conference on Pickling and Descaling, ASM, Pittsburgh, USA, 1993.

56

M. J. Klein and R. G. Reddy: "Reduction Kinetics of Chromite with Carbon," SME Annual Meeting, Albuquerque, NM, USA, Feb. 16, 1994.

57

P. T. Velu and R. G. Reddy: "Solubility of Lithium Compounds in LiF-CaF2 Electrolyte by EMF Measurements," TMS Annual Meeting, Feb. 28, 1994.

58

R. G. Reddy: Keynote Lecture - "Spent Potliners - Safe Disposal and Utilization," International Symposium on Metallurgical Processes for the Year 2000 and Beyond, TMS Fall Meeting, September 21, 1994.

59

S. G. Kumar and R. G. Reddy: "Processing of Ti-Al-Nb Alloys," TMS-ASM Materials Week, Rosemont, IL, October 3, 1994.

60

D. M. Kocherginsky and R. G. Reddy: "Reactions between Aluminum-Silicon Melt and Carbon," TMS-ASM Materials Week, Rosemont, IL, October 5, 1994.

61

S. G. Kumar and R. G. Reddy: "Synthesis and Characterization of TiAl3-Nb Alloy," TMS Annual Meeting, Las Vegas, NV, February 13, 1995.

62

R. G. Reddy: Graduate Seminar, "Thermodynamic Modeling of Materials and Processes," University of California, Davis, CA, February 27, 1995.

63

R. G. Reddy: "Thermodynamic Modeling of Sulfur Reactions in Highly Ordered Liquids," Invited Lecture, Massachusetts Institute of Technology, Cambridge, MA, March 14, 1995.

64

Z. Cai and R. G. Reddy: "Evaluation of Radionuclides Removal Using Zeolites," Materials Week, TMS-ASM, Cleveland, OH, October 31, 1995.

65

R. G. Reddy: Invited Lecture, "Role of Viscosity in Conversion of Lead Slag Wastes into Commercial Products," The International Symposium on Recycling of metals and Engineered Materials, TMS , Point Clear, Alabama, November 14, 1995.

66

R. G. Reddy and S. G. Kumar: "Phase Equilibria in Ti-Al-Nb System," Materials Week, TMS-ASM, Cleveland, OH, 30 October - 2 November 1995.

67

R. G. Reddy and J. Y. Yen: “Viscosities of PbO-SiO2 Slags,” Pyrometallurgy, SME Annual Meeting, Phoenix, AZ, March 13, 1996.

68

R. G. Reddy and W. Zhao: “Sulfide Capacities of CaO-AlO1.5 and CaO- FeO- SiO2 Slags,” Materials processing Fundamentals Symposium I, TMS Annual Meeting, Anaheim, CA, February 5, 1996.

69

R. G. Reddy, J. U. Ejiofor, X. Wen, Y. Li, and P. T. Velu: Processing and thermodynamics of Advanced High Temperature Materials, The 10th Alabama Materials Research Conference, Auburn, Alabama, September 18, 1996.

70

R. G. Reddy: Graduate Seminar, "Thermodynamic Modeling of Metal-Matrix Composites- Al-Si-C System," Department of Material Science and Engineering, University of Cincinnati, November 8, 1996.

71

R. G. Reddy: Invited speaker, "Refining Reactions in Foundry Melts," Metal Casting Technology Center Industrial Symposium, The University of Alabama, November 20, 1996.

72

R. G. Reddy: "Phosphide and Phosphate Capacities in CaO-CaF2 Slags," Molten Slags, Fluxes and Salts’97, Sydney, Australia, January 5-8, 1997.

73

R. G. Reddy and Yang Li, “Oxidation Behavior of Ternary Ti3Al-Nb Alloy,” High Temperature Titanium Alloys, TMS Annual Meeting, Orlando, FL, February 10, 1997.

74

R. G. Reddy and W. Zhao:  “Sulfide Capacity of FeO-based Slags,” Materials Processing Fundamentals Symposium I, TMS Annual Meeting, Orlando, FL, February 11, 1997.

75

P. T. Velu and R. G. Reddy: “Thermodynamic Modeling of Calciothermic Reduction of NdF3,” Rare Earths, Science, Technology and Applications IV, TMS Annual Meeting, Orlando, FL, February 11, 1997.

76

J. U. Ejiofor, B. A. Okorie, and R. G. Reddy: “Studies on Sintered Zircon-Reinforced Aluminum Alloy Matrix Composites,” Advances in Synthesis and Processing of Metal Ceramic Matrix Composites III, TMS Annual Meeting, Orlando, FL, February 12, 1997.

77

R. G. Reddy and X. Wen: “Oxidation Behavior of Al3Ti Intermetallics,” General Metallurgy, TMS Annual Meeting, Orlando, FL, February 12, 1997.

78

R. G. Reddy and G. P. Singh: “Toxic Elements Removal from Copper Smelter Discard Slags,” Pyrometallurgy, SME Annual Meeting, Denver, CO, February 24, 1997.

79

R. G. Reddy and A. E. Torma: “Microbiological oxidation of CdS Concentrate,” Metallurgical Processing Fundamentals I, SME Annual Meeting, Denver, CO, February, 1997.

80

R. G. Reddy, Invited Speaker: "Processing and Thermodynamics of Advanced High Temperature Materials," Spring 1997 Materials Science Meeting, The University of Alabama, April 11,1997.

81

R. G. Reddy: Invited Speaker, "Thermodynamic Modeling of Metal-Matrix Composites (MMCs)," Division of Theoretical Metallurgy, Royal Institute of Technology, April 18,1997, SWEDEN.

82

R. G. Reddy: Invited Speaker, "Recycling Spent Materials and Recovering of Valuable Metals," KIPCO, Kuwait, Kuwait City, June 15, 1997, Kuwait.

83

J. U. Ejiofor and R. G. Reddy: "Influence of Reinforcement Activation on Sintered Char Reinforced Al-Si Alloy Composites,” Materials Week '97, Indianapolis, IN, September 17, 1997, USA.

84

R. G. Reddy, Invited Lecturer: "Thermodynamic Modeling of Metal Matrix Composites," Indian Institute of Technology, Bombay, August 13, 1997, India.

85

R. G. Reddy, Invited Speaker: "Advances in Materials Processing," REC Warangal, Kakathiya University, Warangal, July 29, 1997, India.

86

R. G. Reddy: Keynote Lecture, "Fire Assaying," Workshop, Canadian Mineral Analysts, 29th Annual Conference, CMA '97, Quebec, QC, September 14, 1997, Canada.

87

R. G. Reddy: “A Novel Manufacturing Process For Lightweight Alloy Composites,” NSF- DMI Conference, Monterrey, January 5-8,1998, Mexico.

88

J. U. Ejiofor and R. G. Reddy: "Effects of Pressure Induced Reinforcement Degradation in the Processing of Short-Fiber Reinforced Al-Si Composites," TMS Annual Meeting, San Antonio, TX, February 16, 1998, USA.

89

Y. Li and R. G. Reddy: "Oxidation Behavior of Ternary Ti3Al-Ta Alloys," TMS Annual Meeting, San Antonio, TX, February 18, 1998, USA.

90

R. G. Reddy, "Processing of Titanium-Alminum Intermetallics," (John R. Lewis Distinguished Lecturer, The University of Utah, Salt Lake City, Utah), April 1, 1998, USA.

91

R. G. Reddy: "Electrochemical Processing of Lightweight Alloys," (John R. Lewis Distinguished Lecturer, The University of Utah, Salt Lake City, Utah), April 2, 1998, USA.

92

R. G. Reddy: "Processing Studies on Radio Nuclides Removal and Immobilization," (John R. Lewis Distinguished Lecturer, The University of Utah, Salt Lake City, Utah), April 2, 1998, USA.

93

R. G. Reddy: "Molten Metal Processing - Refining Reactions in Ferrous and Non-Ferrous Metals," (John R. Lewis Distinguished Lecturer, The University of Utah, Salt Lake City, Utah), April 3, 1998, USA.

94

Sutham Niyomwas and Ramana G. Reddy: “Synthesis of Advanced Materials by Thermal Plasma Processing,” TMS Annual Meeting, San Diego, CA, March 1, 1999, USA.

95

Ramana G. Reddy: “Phosphate Capacities of CaO Slags,” TMS Annual Meeting, San Diego, CA, March 2, 1999, USA.

96

Yang Li and Ramana G. Reddy: “Oxidation Behavior of Ternary Ti-Al-Nb Alloy,” TMS Annual Meeting, San Diego, CA, March 2, 1999, USA.

97

Xuerong Wen and Ramana G. Reddy: “Isothermal Oxidation Behavior of Ti-49Al Alloy,” TMS Annual Meeting, San Diego, CA, March 4, 1999, USA.

98

R. G. Reddy and D. M. Kocherginsky, In-situ Formation of Silicon Carbide in Aluminum Alloys, Materials Solutions, ASM International, October 13, 1999, USA.

99

R. G. Reddy: Invited Lecture, Plasma Processing of Advanced Materials, Indian Institute Technology, Bombay, January 5, 1999, India.

100

S. McElroy and R. G. Reddy, Laser Surface Treatment of Titanium Aluminides, (poster presentation), TMS, San Diego, CA March 1, 1999, USA.

101

R. G. Reddy: Kinetics of Chromite Reduction, Invited Lecture, Royal Institute Technology, Stockholm, January 29, 1999, Sweden.

102

R. G. Reddy: Viscosity of Non-Newtonian Metallurgical Slags, Invited Lecture, Union Minere, Belgium, September 1999, Belgium.

103

R. G. Reddy: Invited Lecture, Plasma Processing of Advanced Materials, Union Minere, Belgium, September 10, 1999.

104

R. G. Reddy: “Sulfidation of TiAl Intermetallics,” ASM International, Cincinnati, OH, November 3, 1999.

105

R. G. Reddy and Leo Brewer, “Thermodynamic Properties of Ti-Al Alloys,” Kleppa Symposium on High Temperature Thermochemistry of Materials, TMS March14, 2000.

106

R. S. Chiou and R. G. Reddy, “Metallothermic Processing of Nd from NdF3,” Rear Earths and Actinides; Science Technology and Applications: Rare Earths Processing; TMS, March 15, 2000.

107

B. Wu and R. G. Reddy, “In-Situ Synthesis of Al-Si Alloy and SiC Composite,” Research and Development Efforts on Metal Matrix Composites: Poster Session on MMCs, TMS, March 15, 2000.

108

R. G. Reddy, "Thermodynamic Modeling of Sulfide Capacities of Melts," Invited Speaker, International Conference on Molten Slags, Fluxes and Salts, Stockholm, Sweden – Helsinki, Finland, 12-17 June, 2000.

109

S. McElroy and R. G. Reddy, “Laser Surface Modification of TiAl Intermetallics”, Conference on Aerospace Materials, Processes, and Environmental Technology (AMPET), Hunntsville, AL, September 17-20, 2000.

110

Sherman A. McElroy, Ramana G. Reddy, Vinod K. Sikka, and Craig Al Blue, “ Surface Modification of Aluminides Processed by a Plasma Arc Lamp,” The 130th Annual meeting of TMS, New Orleans, Louisiana, February 11-15, 2001.

111

Mario F. Arenas, Viola L. Acoff, and Ramana G. Reddy, “Physical Properties of Selected Brazing Filler Alloys,” The 130th Annual meeting of TMS, New Orleans, Louisiana, February 11-15, 2001.

112

Xiaozheng Lin and Ramana G. Reddy, “Modeling Calculation of Sulfide and Phosphate Capacities,” The 130th Annual meeting of TMS, New Orleans, Louisiana, February 11-15, 2001.

113

B. Wu, R. G. Reddy, and R. D. Rogers, Invited Lecture, “Potential Applications of Ionic Liquids in Aluminum Industries,” American Chemical Society 221st national Meeting, April 1-5, 2001.

114

R. G. Reddy and V. Kamavaram, Invited Lecture, “Application of ionic liquids in Aluminum Extraction and refining”,  Molten Salts – Fundamentals and Applications, NATO Conference, Kas, Turkey, May 3- 14, 2001.

115

R. G. Reddy, "Modeling of Sulfur Capacity of Metallurgical Slags," Invited Lecture, AMP Symposium, University of Utah, Salt Lake City, August 16, 2001.

116

S. K. Kim, R. G. Reddy, and Y. I. Park, “Atmospheric Corrosion of Common Structural Metals,” presented at Asian galvanizing Conference, Pusan, Korea in Sept. 2001.

117

Z. Zhang and R. G. Reddy, “In-Situ processing of AlN –Al alloy composites”, TMS Fall meeting, November 7, 2001.

118

S. Janakiraman and R. G. Reddy, “Development Electrode materials for Double Layer Capacitors”, ASM International, November 7, 2001.

119

A. Kumar and R. G. Reddy, “Design and Fabrication Bipolar plates and System Integration in PEMFC”, ASM International, November 7, 2001.

120

R. G. Reddy, "Processing of Metal Matrix composites," Invited Lecture, ARCI, Hyderabad, India, June 22, 2001.

121

R. G. Reddy, "Electrochemical Processing of Aluminum using Ionic Liquids," Invited Lecture, SECAT Inc., Lexington, KY, November 30, 2001.

122

R. G. Reddy, "Thermal Stability of Ionic Liquids," Invited Lecture, NREL, Denver, CO, December 18-19, 2001.

123

R. G. Reddy, "In-Situ processing of Ultrafine Metal Matrix Composites," Invited Lecture, Department of Materials Engineering, University of Alabama, Birmingham, AL, December  6, 2001.

124

R. G. Reddy, “Environmental Engineering in Extractive Metallurgy," Jones Lecture, Thayer School of Engineering, Dartmouth College, Hanover, NH, October 19, 2001.

125

Z. Zhang and R.G. Reddy, “Thermodynamics of in-situ processing of aluminium Alloy matrix composites”, TMS Annual meeting, February 19, 2002.

126

R. G. Reddy, “Emerging Technologies in Extraction & Processing of Metals”, Extraction & Processing Division Distinguished Lecture, TMS Annual Meeting, February 19, 2002.

127

R. G. Reddy, “Aluminum Extraction using Ionic Liquids”, Banquet Speaker, SECAT Inc., Lexington, KY, March 19, 2002.

128

R. G. Reddy, “Innovations in Extraction and Processing of Metals”, 2002 Seminar Series Invited Lecture, Columbia University, New York, April 1, 2002.

129

B. Derin and R. G. Reddy, “Modeling of Sulfide Capacities of FeO based Ternary Silicate Melts," 11th International Metallurgy and Materials Congress, Istanbul, Turkey, August 19, 2002.

130 T. Gribben and R. G. Reddy, “Processing of Zinc and Lead Oxides Containing Materials in High Temperature and High Pressure Reactors”, 2003 SME Annual Meeting and Exhibit, Cincinnati, Ohio, February 24-26, 2003.
131 R. G. Reddy, “Impurity Capacities in Metallurgical Slags”, Plenary Lecture, Yazawa International Symposium, Materials Processing Fundamentals and New Technologies, Vol. 1, Ed., H. Y. Sohn et. al., TMS, Warrendale, PA, March 2-6, 2003, pp. 25-48.
132 Qingjun Zheng and Ramana G. Reddy, “Development of Discontinuously Reinforced Al Alloy Composites for Automotive Applications”, 132nd TMS Annual Meeting, San Diego,CA, March 2-6, 2003.
133 Abhijeet Prakash Joshi, Mario F. Arenas and Ramana G. Reddy, “Silicon Carbide Coating on Ti-6Al-4V Alloy Using Laser Surface Modification”, 132nd TMS Annual Meeting, San Diego, CA, March 2-6, 2003.
134 R. G. Reddy, M. F. Arenas, Z. Zhang, “Evaluation of Ionic as Heat Liquids as Heat Transfer Fluids for Solar Thermal Parabolic Trough Technology”, 132nd TMS Annual Meeting, San Diego, CA, March 2-6, 2003.
135 Venkat Kamavaram and Ramana G. Reddy, “Aluminum Electrorefining in Ionic Liquids via Near Room Temperature Electrolysis”, 132nd TMS Annual Meeting, San Diego, CA, March 2-6, 2003.
136 Leo V. M. Antony and Ramana G. Reddy, “Thermal Plasma Processing of SiC Powders”, 132nd TMS Annual Meeting, San Diego, CA, March 2-6, 2003.
137

Ramana G. Reddy, “Micro Fuel Cells for Portable Power Applications”, MINT Seminar, The University of Alabama, Tuscaloosa, AL, March 21, 2003.

138

R. G. Reddy, “Innovations in Processing of Composites”, Invited Lecture, Indian Institute of Technology, Bombay, India, August 1, 2003.

139

R. G. Reddy, “Capacities of Metallurgical Slags”, Invited Lecture, National Institute of Technology, Warangal, A.P., India, August 7, 2003.

140

R. G. Reddy, “Innovations in Plasma and Laser Processing of Materials”, Invited Lecture, International Science & Technology Affairs Group (ISTAG), National Physical Laboratory, Delhi, India, August 14, 2003.

141

R. G. Reddy, “Processing of Nanoscale Materials”, Invited Lecture, Nanomaterials and Nanotechnologies-NN2003, Crete, Greece, September Aug. 30 – Sept. 6, 2003.

142

R. G. Reddy and A. Kumar, “Materials and Design Development for Bipolar/End plates in Fuel Cells”, Invited Lecture, High Energy Density Electrochemical Power Sources”, Nice, France, September 17-20, 2003.

143

Ramana G. Reddy, “Fuel Cells for Energy Systems”, Electrical and Computer Engineering Department (ECE) Seminar, The University of Alabama, Tuscaloosa, AL, November 19, 2003.

144

R. G. Reddy, “Impurities Capacities of Slags”, Invited Lecture, Departamento de Ingeniería Metalúrgica, The Universidad de Concepción, Concepción, Chile, November  28, 2003.

145

Z. Zhang and R. G. Reddy, Keynote Lecture, “Structure Model and Properties of Alakali Borate Melts”,  VII International Conference on Molten Slags, Fluxes and Salts,  The South African Institute of Mining and Metallurgy, Cape Town, South Africa, January 28, 2004

146

R. G. Reddy, Keynote Lecture, “Recent Developments in Materials and Design concepts for Bipolar Plates in Fuel Cells”, Advanced Materials for Energy Conversion II, TMS Annual Meeting, Charlotte, USA, March 17, 2004.

147

R. G. Reddy, Plenary Lecture, “Environmental Engineering in Extraction of Metals”,  VI International Conference on “Clean Technologies  for the Mining Industry”, Concepcion, Chile, April 18-21, 2004.

148

R. G. Reddy, Invited Lecture, “Aluminum Electrolysis in Ionic Liquids at Low Temperature”, Metal Separation Technologies III, Engineering Conferences International, Copper Mountain, Colorado, USA, June 20-24, 2004.

149

R. N. Reddy and R. G. Reddy, “Studies of Capacitance of Carbon Xerogels derived from Resorcinol-Formaldehyde Polymers”, Electrochemical Capacitor and Hybrid Power Sources. ECS Meeting, Honolulu, Hawaii, USA, October 6, 2004.

150

R. G. Reddy, Invited Lecture, “Fuel Cell Technology and Hydrogen Economy”, Fuel Cells: Materials, Processing & Manufacturing Technologies Symposium, Materials Solutions Conference and Exposition, Columbus, Ohio, USA, October 19, 2004.

151

R. G. Reddy and L. Tong, “Processing of Al-TiC Nanocomposites by Thermal Plasma”, Frontiers of Materials Science & Engineering Symposium 2004: Bridging Science & Manufacturing, Nano- and Biomaterials, Materials Solutions Conference and Exposition, Columbus, Ohio, USA, October 19, 2004.

152

R. G. Reddy, “Reduction of Alumina using Fluorine Containing Ions”, Annual Aluminum R&D Project Review, Argonne, IL, USA, October 20, 2004.

153

R. G. Reddy, “Fuel Cells Technology and Applications”, Graduate Seminar, Department of Electrical and Computer Engineering, The University of Alabama, Tuscaloosa, AL, November 3, 2004.

154

R. G. Reddy, L. Tong and S. Sen, “Thermodynamic Modeling and Experimental Studies on Planetary Materials”, Lunar Regolith Simulant Materials Workshop, NASA/MSFC-JSC, Huntsville, AL, January 24, 2005.  

155

M. Shamsuzzoha, E. T. Ada and R.G. Reddy, “Distribution of Metallic (Pt. Pd) Nanoparticle Catalysts in Ceramic Substrates”, Frontiers in Thin Film Growth and Nanostructured Materials, TMS, February 14, 2005.

156 R. G. Reddy and J. C. Font, “Arsenic Capacity of Copper Slags”, Plenary Lecture, Arsenic Metallurgy, TMS, San Francisco, CA, February 14, 2005.
157  M. Zhang, V. Kamavaram and R. G. Reddy, “Application of Ionic Liquids as Thermal Energy Storage Media”, 1st International Congress on Ionic Liquids (COIL), Salzburg, Austria, June 19-22, 2005.
158  R. G. Reddy and V. Kamavaram, Invitational, “Electrochemistry of Aluminum in Ionic Liquids”, 1st International Congress on Ionic Liquids (COIL), Salzburg, Austria, June 19-22, 2005.
159  V. V. Nikam and R. G. Reddy, “Hydrogen Utilization in Polymer Electrolyte Membrane Fuel Cell with Corrugated Sheet Copper Alloy Bipolar/End Plates”, Materials For Hydrogen Economy: Fuel Cells I, Materials Science & Technology (MS&T’05) Conference and Exhibition, Pittsburgh, USA, September 26, 2005.
160  B. R. Padhy and R. G. Reddy, “Metallic Bipolar Plates for Direct Methanol Fuel Cells (DMFC)”, Materials For Hydrogen Economy: Fuel Cells I, Materials Science & Technology (MS&T’05) Conference and Exhibition, Pittsburgh, USA, September 26, 2005.
161 R. G. Reddy, “Low Temperature Reduction of Aluminum Using Fluorine Containing Ionic Liquids”, FY 2005 DOE-Aluminum IOF Project Review, DOE-OIT, Oakridge National Laboratory, Oakridge, TN, USA, October 5, 2005.
162 R. Nagireddy and R. G. Reddy, “Electrochemical Capacitance Properties of Polymer Derived Carbon Electrode Material”, Energy for Cleaner Transportation, Energy Technology/Battery (M2-868), The Electrochemical Society (ECS), Los Angeles, USA, October 17, 18, 2005.
163 M. Zhang and R. G. Reddy, “Current Density Distribution and Current Efficiency Modeling of Aluminum Electrodeposition in Ionic Liquids”, Multiscale Simulations of Electrochemical Systems: Computational Aspects (R1-1093), The Electrochemical Society (ECS), Los Angeles, USA, October 20, 2005.
164

B. R. Padhy and R. G. Reddy, “Performance of DMFC with TiN Coated Aluminum Bipolar/End Plates”, Durability and Reliability of Low-Temperature Fuel Cells and Fuel Cell Systems (X2-1214), The Electrochemical Society (ECS), Los Angeles, USA, October 20, 2005.

165  R. G. Reddy, Invited, “In-Situ Processing of Lightweight Alloy Composites”, The Rohatgi Symposium on Solidification Processing of Metal Matrix Composites: Overview of Developments in Cast MMCs, TMS, San Antonio, Texas, USA, March 13, 2006.
166  M. Zhang and R. G. Reddy, “Ionic Liquids Applications in Extraction of Metals”, Pyrometallurgical Processing, 2006 SME Annual Meeting & Exhibit, St. Louis, MO, USA, March 28, 2006.
167 B. Derin and R. G. Reddy, “Sulfide Capacities of Copper Smelting Slags”, Pyrometallurgical Processing, 2006 SME Annual Meeting & Exhibit, St. Louis, MO, USA, March 28, 2006.
168 R. G. Reddy, “Milton E. Wadsworth Extractive Metallurgy Award Lecture”,  "Ionic Liquids Metallurgy: A Novel Aluminum Extraction and Refining Technology", 2006 SME Annual Meeting & Exhibit, St. Louis, MO, USA, March 29, 2006.
169 R. G. Reddy, “Lifetime Achievements of Professor Sohn”, Plenary, Sohn International Symposium on Advanced Processing of Metals and Materials: Principles, Technologies and Industrial Practice, 2006 TMS Fall Symposium, San Diego, CA, USA, August 28, 2006.
170 V. K. Namilakonda and R. G. Reddy, "Processing of Al Alloy-AlN Metal Matrix Composites", Sohn International Symposium on Advanced Processing of Metals and Materials: Principles, Technologies and Industrial Practice, Thermo and Physicochemical Principles, Nano and Composite Materials I, 2006 TMS Fall Symposium, San Diego, CA, USA, August 28, 2006.
171 V. Kamavaram and R. G. Reddy, "Aluminum Extraction in Ionic Liquids at Low Temperature." Keynote, Sohn International Symposium on Advanced Processing of Metals and Materials: Principles, Technologies and Industrial Practice, New, Improved and Existing Technologies, Non-Ferrous High Temperature Processing, 2006 TMS Fall Symposium, San Diego, CA, USA, August 29, 2006.
172 B. Derin, O. Yucel and R. G. Reddy, "Predicting of Sulfide Capacities of Industrial Lead Smelting Slags", Invited, Sohn International Symposium on Advanced Processing of Metals and Materials: Principles, Technologies and Industrial Practice, Thermo and Physicochemical Principles, Non-Ferrous High Temperature Processing: Thermodynamics I, 2006 TMS Fall Symposium, San Diego, CA, USA, August 29, 2006.
173 M. Zhang, and R. G. Reddy, "Aluminum Extraction via Batch Recirculation Electrolysis in Ionic Liquids", Invited, Sohn International Symposium on Advanced Processing of Metals and Materials: Principles, Technologies and Industrial Practice, New, Improved and Existing Technologies, Non-Ferrous High Temperature Processing II, 2006 TMS Fall Symposium, San Diego, CA, USA, August 30, 2006.
174 V. V. Nikam and R. G. Reddy, "Novel Flow Field Design for PolymerElectrolyte Membrane Fuel Cell Bipolar Plates", Fuel Cells and Energy Storage Systems: Materials Processing, Manufacturing and Power Management Technologies: Electrodes and Electrolyte in PEM Fuel cells: Materials, Performance, and Degradation, MS&T’06, Cincinnati, Ohio, USA, October 16, 2006.
175 M. Zhang and R. G. Reddy, "Recycling of Aluminum Alloy Waste via Ionic Liquid Electrolytes", Green Engineering for Materials Processing, Materials Science & Technology, MS&T’06, Ohio, USA, October 18, 2006.
176 V. K. Namilakonda and R. G. Reddy, "Effect of Processing Parameters on Al-AlN Matal Matrix Composites", Innovative Processing and Synthesis  of Ceramics, Glasses and Composites, MS&T’06, Ohio, USA, October 18, 2006.
177 R. G. Reddy, Henry Krumb Lecture, "Recent Developments in Copper Smelting Technologies", Alabama Section of The Society for Mining and Metallurgy Exploration, Inc., (SME), Birmingham, AL, November 16, 2006.
178 R. G. Reddy, Invited Talk, "Ionic Liquids Metallurgy: A Novel Aluminum Technology", National Institute of Technology (NIT), Warangal, AP, India, January 3, 2007.
179 R. G. Reddy, Henry Krumb Lecture, "Economical and Environmental Copper Smelting", Southern California Mining Section, SME, Pomona, CA, January 16, 2007.
180 R. G. Reddy, Invited Lecture, "Fuel Cells for Portable Power Applications- Materials Design and Modeling", ASME/AIAA/AIChE Chapters, California State Polytechnic University, Pomona, CA, January 18, 2007.
181 R. G. Reddy, Invited Lecture, "Fuel Cells Technology and Applications", University of California, Irvine, CA, January 19, 2007.
182 J. Font and R. G. Reddy, "Minor Elements Distribution in Olivine Slags", Pyrometallurgical Processing, 2007 SME Annual Meeting & Exhibit, Denver, CO, USA, February 27, 2007.
183 R. G. Reddy, Henry Krumb Lecture, "Environmental Engineering in Copper Smelting", SME Maricopa Section, SME, Phoenix, AZ, March 15, 2007.
184 R. G. Reddy, Invited Lecture, "Ionic Liquids: “Novel Electrolytes for Metal Processing", Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, UK, May 25, 2007.
185 R. G. Reddy, Invited Lecture, “Plasma Processing of Nanoscale Materials”, Umicore Research, UMICORE, Olen, Belgium, June 1, 2007.
186 Angelica Cox, Mingming Zhang and R. G. Reddy, “Metallurgical Processing of Lunar Materials”, Poster presentation, Responsibility for the Future Exploration and Development of Space, Gloria and  John L. Blackburn Academic Symposium, The University of Alabama, Tuscaloosa, August 25, 2007.
187 R. G. Reddy, Invited Lecture, “Processing of Automotive Al Alloy/AlN Composites”, Automotive Light Metal Castings: Technology and Applications: Microstructure Evolution, Phase Transformation and Light Metal Composites, MS&T 07, Detroit, Michigan, USA, September 20, 2007
188 R. G. Reddy, R. K. Mishra and A. Menon, Invited lecture, “Platinum Alloys Dissolution in Aqueous Solutions”, 2007 Precious Metal Processing Symposium, Tucson, Arizona, October 3-6, 2007
189 R. G. Reddy, Invited Lecture, “Plasma Processing of Nanoscale Materials”, Department of Materials Science and Engineering, National Taiwan University, Taipei, Taiwan, November 2, 2007.
190 R. G. Reddy, Invited Lecture, “Materials Engineering education in USA and Ionic Liquid research”, University of Ulsan, Ulsan, Korea, November 9, 2007.
191 B. Chen and R. G. Reddy, “Oxidation of Refractory Gold Ores”, Mineral & Metallurgical Processing: Technologies Involving Hydrometallurgy/Pyrometallurgy, 2008 SME Annual Meeting & Exhibit, Salt Lake City, UT, USA, February 25, 2008.
192 Chris Williams and R. G. Reddy, “High Temperature studies of Ti3Al – 4 at% Mo in Pure Oxygen”, Light Metals Division, TMS, New Orleans, USA, March 11, 2008.
193 R. G. Reddy, Invited Lecture, “Ionic Liquids Research at the University of Alabama: An Overview”, Cytec Industries Inc., Stamford, CT, USA, April 25, 2008.
194 R. G. Reddy, Invited Lecture, “Uranium Materials Processing-Bio-leaching and Adsorption Using Zeolites”, MS&T 2008, Pittsburgh, USA, October 8, 2008.
195 R. G. Reddy, Plenary Lecture, “Lightweight Metals Recycling via Ionic Liquids Electrolytes”, REWAS 2008, Cancun, Mexico, October 13, 2008.
196 A. Yahya and R. G. Reddy, “Sulfur Reactions in Recycling of Ferrous Scrap”, REWAS 2008, Cancun, Mexico, October 14, 2008.
197 R. G. Reddy, Invited Lecture, “Novel Applications of Ionic Liquids in Materials processing”, International Conference on Advanced Structural and Functional Materials design 2008, Osaka University, Osaka, Japan, November 11, 2008.
198 R. G. Reddy, Golden Jubilee Lecture Series - Invited Lecture, “Novel Ionic Liquid Electrolytes for Metals Processing”, National Institute of Technology, Warangal, India, December 29, 2008.
199 R. G. Reddy, Golden Jubilee Lecture Series - Invited Lecture, “Plasma Processing of Nanoscale Materials”, National Institute of Technology, Warangal, India, December 30, 2008.
200 R. G. Reddy, Golden Jubilee Lecture Series - Invited Lecture, “Nanoparticle Reinforced Metal Matrix Composites”, National Institute of Technology, Warangal, India, December 31, 2008.
201 R. G. Reddy, Distinguished Lecture Series - Invited Lecture, “Advanced Materials- Novel Concepts and Applications”, Osmania University, Hyderabad, India, January 5, 2009.
202 M. Ramachandran and R. G. Reddy, “Thermodynamics of Nanoscale Binary Systems”, TMS, San Francisco, CA, USA, February 16, 2009.
203 R. G. Reddy, “Novel Low Temperature Ionic Liquids Processing for Refining of Titanium," 2009 SME Annual Meeting & Exhibit, Denver, CO, USA, February 24, 2009.
204 M. Ramachandran, S. Niyomwas and R. G. Reddy, “Thermal Plasma Synthesis of Titanium Diboride”, TMS, Seattle, WA, USA, February 15, 2010.
205

R. G. Reddy, (Keynote), “Innovations in Processing of Lightweight Metal Matrix Composites”, Processing Materials for Properties Symposium, TMS, Seattle, WA, USA, February 15, 2010.

206

Y. Lu and R. G. Reddy, “Performance of Micro-DMFCs with two kinds of Flow Fields”, Materials in Clean Power Systems V, TMS, Seattle, WA, USA, February 17, 2010.

207

Z. Zhang and R. G. Reddy, “Thermodynamics of Flash Oxidation of Copper Sulfides’, Pyrometallurgy, SME Annual meeting, Phoenix, AZ, USA, March 3, 2010.

208

R. G. Reddy, “Do metallic iron exists on the surface of the Moon?”, Separation innovation and novel technology, SME Annual meeting, Phoenix, AZ, USA, March 1, 2010.

209

R. G. Reddy, (invited), Electrochemical Processing of Lightweight Alloys”, Northeastern University, Shenyang, China, May 16, 2010.

210

R. G. Reddy, (invited), Modeling of Sulfur and Impurity Reactions in Slag-Metal Systems, University of Science and Technology Beijing (USTB), , Beijing, China, May 20, 2010.

211

R. G. Reddy, (invited), Addressing Energy and Environmental Concerns in production of Light Metals, University of Science and Technology Beijing (USTB), Beijing, China, May 21, 2010.

212

R. G. Reddy, (invited), Ionic Liquids Metallurgy: Materials Processing, Universidad Tecnica Federico Santa Maria (UTFSM), Valparaiso, Chile, June 21, 2010.

213

R. G. Reddy, (invited), Energetic and Environmental Copper Smelting, Institute for innovation in Mining Metallurgy, Santiago, Chile, June 22, 2010.

214

R. G. Reddy, (invited), Impurity Capacity (S, As, Sb) of Smelting Slags, University of Concepcion, Concepcion, Chile, June 24, 2010.

215

M. Ramachandran and R. G. Reddy, “Boron Carbide (B4C) Nanopowders using Thermal             Plasma”, ICCE-18, Anchorage, Alaska, USA, July 7, 2010.

216

R. G. Reddy, (invited), “Modeling of Sulfur and Impurity Reactions in Slag-Metal Systems”, CSIRO, Melbourne, Australia, July 30, 2010.

217

R. G. Reddy, (invited), “Ionic Liquid Metallurgy: Novel Electrolytes for Light Metals Processing”, The University of Auckland, Auckland, New Zealand, August 9, 2010.

218

R. G. Reddy, (invited) “Thermal Plasma Synthesis of Core-shell structures”, Controlled processing of nanoparticle-based materials and nanostructured films: low dimensional nanomaterials I, MS&T’10, Houston, TX, USA, October 18, 2010.

219

R. G. Reddy, (invited) “Interfacial properties prediction of liquid metal-inclusion-refractory systems”, Processing, Crystal growth and phase equilibrium of advanced materials: solidification and crystal growth II, MS&T’10, Houston, TX, USA, October 20, 2010.

220

D. Mantha and R. G. Reddy, “Thermodynamic Modeling of LiNO3-NaNO3-KNO3 Ternary Salt for Energy Storage”, Computational Thermodynamics and Kinetics: poster session, TMS, San Diego, CA, USA, February 27, 2011.

221

Ramana G. Reddy, “Thermodynamics and Processing of Nanomaterials”, TMS, San Diego, CA, USA, February 28, 2011.

222

M. Ramachandran  and  R. G. Reddy, “Oxidation and Interfacial structure of Ti3Al”, TMS, San Diego, CA, USA, March 1, 2011.

223

Z. Zhang and R. G. Reddy, “Experimental Studies on Flash Oxidation of Chalcopyrite”, SME, Denver, CO, USA, March 2, 2011.

224

R. G. Reddy, Thermal Energy Storage Materials for Solar Power Generation, Department of Mechanical Engineering, TA&MU, College Station, TX, March 20, 2011

225

R. G. Reddy, Solar Power Generation - A Sustainable Alternative Energy Technology, MS&T, Columbus, OH, October 17, 2011.

226

D. Pradhan and R. G. Reddy, Dendrite Free Electrochemical Deposition of Aluminum from Al Scrap Using Ionic Liquids, Fray Symposium, Cancun, Mexico, November, 28, 2011.

227

R. G. Reddy, Synthesis of Nanosclae Materials and Composites, Srinidhy Institute of Science & Technology (SNIT), Hyderabad, India, January 4, 2012.

228

R. G. Reddy, Lightweight Materials Processing, DMRL, Hyderabad, India, January 5, 2012.

229

R. G. Reddy, Solar Energy- A Sustainable Alternative Energy Source, Advanced Research Center (ARC), Hyderabad, India, January, 6, 2012.

230

R. G. Reddy, Processing of Nanoscale Materials, National Institute of Technology (NIT), Warangal, India, January 10, 2012.

231

M. Ramachandran and R. G. Reddy, Production of SiC Using Thermal Plasma, TMS 2012, Orlando, FL, March 13, 2012.

232

R. G. Reddy, Plenary Lecture, "Molten Salt Thermal Energy Storage Materials for Solar Power Generation", Molten 12, Beijing, China, May 28, 2012.

233

R. G. Reddy, Seminar, "Thermal Energy Storage Materials for Solar Power Generation", Norwegian University of Science and Technology (NTNU), Trondheim, Norway, August 31, 2012.

234

R. G. Reddy and A. Yahya, Key Note Lecture, " Sulfide Capacities of MnO Slags", Fifth International Congress on the Science and Technology of Steelmaking, ICS 2012, Dresden, Germany, October 3, 2012.

235

R. G. Reddy, "Rare Earth Metals Separation Processes and Recycling", DMRL, India, February 8, 2013.

236

R. G. Reddy, "Nanoparticle Reinforced Metal Matrix Composites (MMCs)",  National Institute of Technology  (NIT), Warangal, India, February 18, 2013.

237

A. Yahya and R. G. Reddy, "Sulfide Capacities of Blast Furnace Slags", Pyrometallurgy, MPD-SME, Denver, February 27, 2013.

238

R. G. Reddy, "Low Melting Point Molten Salts for Thermal Energy Storage Solar Power Generation", National Renewable Energy Laboratory (NREL), Golden, CO, USA, May 9, 2013.

239

R. G. Reddy, “Nanotechnology for Defence Applications- Materials Fundamentals, Processing & Applications”, Science Forum Lecture, DRDO, New Delhi, July 12, 2013

240

R. G. Reddy, “Thermal Energy Storage Materials for Solar Power Generation”, University of Hyderabad, August 1, 2013.

241

R. G. Reddy, “Modeling of Sulfur Reactions in Iron & Steel Making Technologies”, USTB, Beijing, China, September 24, 2013.

242

R. G. Reddy, Invited, “Alternative Manufacturing Process for Production of Metals from Metal Oxides”, Green Technologies for Materials Manufacturing and Processing V, MS&T, Montreal, Canada, October 28, 2013.  

243

M. Ramachandran and R. G. Reddy, “Direct reduction of Magnesium Oxide to Magnesium”, Pyrometallurgy, MPD-SME, Salt Lake City, Utah, February 26, 2014.

244

R. G. Reddy, “Novel Ionic Liquid Electrolytes”, THERMANS-2013, BARC, Mumbai, India, December 19, 2013.

245

R. G. Reddy, “Transformation in Engineering Education”, NITW Alumni conference, December 21, 2013.

246

R. G. Reddy, “Engineering Education & it’s Transformation in USA”, SNIST, Hyderabad, India, January 7, 2014

247

R. G. Reddy, “Interfacial Energetics of Bacterial-Mineral Systems”, Nano, Bio and Material Sciences (ICONBMS), Hyderabad, India, January 8, 2014.

248

R. G. Reddy, “Processing of Nanoparticle Reinforced Metal Matrix Composites (MMCs)”, University of Utah, February 27, 2014.

249

R. G. Reddy, “Sulfide Capacity Reactions in Iron and Steel Making Technologies”,  ArcelorMittal USA, Global R&D, East Chicago, IN, March 26, 2014.

250

R. G. Reddy, “Molten Salts for Thermal Energy Storage”, Argonne National Laboratory, Argonne, IL, March 28, 2014.

251

R. G. Reddy, “Fuel Cells - Solid Oxide Fuel Cells (SOFC) - Materials, Design and Modeling”, Defense research and development organization (DRDO), New Delhi, India, July 25, 2014.

252

R. G. Reddy, “Ionic Liquids-A Solution to energy and environmental concerns in Materials Processing”, Indian Institute of Technology, Delhi, New Delhi, India, July 25, 2014.

253

T. Wang and R. G. Reddy, “Corrosion of nickel based alloys in MgCl2-KCl molten salts as ultra high temperature energy storage fluids for concentrating solar power (CSP) system, High Temperature Corrosion, MS&T, Pittsburgh, USA, October 25, 2014.

254

P. George, M. Zhang, V. Nikam, and R. Reddy, “High efficiency copper extraction through Slag input in copper pyrometallurgy processes”, SME Annual Meeting, Denver, USA, February 18, 2015.

255

R. G. Reddy and P. K. Rao, “Electromagnetic levitation Studies on Decarburization of liquid Fe-Cr-C alloys”, MHD 2015, TMS, Orlando, March 16, 2015.

256

R. G. Reddy, Invited, “Manufacturing of Nanoparticle Reinforced Lightweight Metal Matrix Composites (LMMCs)”, Advanced Manufacturing Workshop, Shanghai University, Shanghai, China, May 28, 2015.

257

R. G. Reddy, Seminar, “Innovations in Processing of Lightweight Metal Matrix Composite”, Chongqing University, Chongqing, China, June 1, 2015.

258

R. G. Reddy, Plenary lecture, “Novel Applications of Molten Organic Salts in Electrochemical Processing of Metals”, 10th international conference on molten salt Chemistry and technology, 5th Asian conference on molten salt chemistry and technology Northeastern University, China, June, 11, 2015.

259

R. G. Reddy, Seminar, “Novel Processing of Non-Ferrous Metals”, Non- Ferrous Metals, Beijing, China, July 21, 2015.

260

R. G. Reddy, Invited, “Innovations in Electrochemical Processing of Non-Ferrous Metals”, Central South University, Changsha, China, July 20, 2015.

261

M. R. Bogala and R. G. Reddy, “Synthesis, Characterization and Stability of Thermoelectric Magnesium Silicide Powder”, MS&T 2016, Columbus, OH, October 5, 2015.

262

R. G. Reddy, invited talk, “Advances in Processing of Lightweight Metal Matrix Composites”, NCAMPC-2016, NIT, Warangal, India, January 6, 2016.

263

J. Young, H. Yang, R. G. Reddy, “Synthesis and grain growth rates of Ti-Ni-Sn based Thermoelectric alloys”, TMS, Nashville, TN, February 16, 2016.

264

Y. Li and R. G. Reddy, “Experimental and Numerical investigation of thermal plasma synthesis of silicon”, TMS, Nashville, TN, February 17, 2016.

265

M. R. Bogala and R. G. Reddy, “Determination of phase equilibria and thermodynamic properties of metal doped magnesium Silicides”, TMS, Nashville, TN, February 17, 2016.

266

R. G. Reddy, “Reduction of Silicon Oxide to Silicon in Thermal Plasma Reactor”, SME, Phoenix, AZ, February 23, 2016.

267

Mallikharjuna R. Bogala and Ramana G. Reddy, “Thermodynamic assessment of electrochemical reduction of TiO2 in molten CaCl2”, Advances in Slags, Fluxes and Salts, TMS, May 22, 2016.

268

A. Yahya and R. G. Reddy, “Sulfide Capacities of CaO - MgO - AlO1.5 - SiO2 Slags”,         Advances in Slags, Fluxes and Salts, TMS, May 24, 2016

269

R. G. Reddy, “Processing of Nanoscale Materials”, NSF-HBCU RISE Workshop on Nonoscience & Technology, Alabama A & M University, Huntsville, AL, June 27, 2016.

270

R. G. Reddy, “Ionic Liquids Electrodeposition of Metals”, PRIME 2016/230 ECS meeting, Honolulu, Hawaii, October 7, 2016.

271

M. R. Bogala and R. G. Reddy, “Reaction Kinetics of Metal-doped Magnesium Silicides”,

MS&T, Salt Lake City, UT, October 24, 2016.

272

M. A Imam and R. G. Reddy, “Synthesis and Thermal Stability of Boron Based High-Temperature Thermoelectric Materials”, MS&T, Salt Lake City, UT, October 26, 2016.

273

J. M. Font and R. G. Reddy, “Antimonate Capacity of Nickel Matte Converting Slags”, SME, Denver, CO, February 22, 2017.

274

J. Young and R. G. Reddy, “Characterization and Feasibility Study of Thermoelectric CoSi2”, TMS, San Diego, CA, March 1, 2017.